Stitching – The secure high quality sealing method

You are interested in a sealing methods that can withstand extreme conditions and would like to provide your customers with a competitive solution?

With stitching BAHMÜLLER offers a high-valuable sealing method to satisfy your customer’s demands – the product group FEFCO Type 200 or RSC using metal staples for efficient sealing. Stitching usually is applied when producing double or triple wall designs.

Depending on requirements the manufacturers joint can be placed either on the inside or on the outside of the box utilizing the box’s sealing tab.

Stitching – The secure high quality sealing method

Manual

The process of manufacturing shipping containers is a multi-step one. The blanks are delivered to the BAHMÜLLER machine. Your machine operator manually folds the panels along the score lines and pushes the folded blank into the machine. The stitching action is activated via foot pedal. The operator needs to guide the blank during the stitching action. This method is used of sample runs, small order quantities.

Wire stitcher ZH

Seasoned technology reduced to the essentials – to be used as arm, table-, or frame mounted versions.

The ZH series should be part of every sample room.

Semi-Automatic

Manufacturing of shipping containers is a multi-step process. The blanks are delivered to the BAHMÜLLER machine. The operator is folding the panels along the score lines. In the semi-automatic sealing machine, the sealing tab is stitched to the panel to seal the box. The box inside the machine is transported via driven belts. This process also applies to sealing two-pieces special size boxes.

Sealing Champion

Your semi-automatic machine for sealing single-piece boxes

The product line SEALING CHAMPION is your solution for sealing single-piece boxes.

Double Champion

Your semi-automatic machine for sealing single- and 2-pieces boxes

The product line DOUBLE CHAMPION is your solution for automatic sealing of single- and 2-piece boxes.

Fully-Automatic

Flexo-Folder Gluers from BGM – Bahmüller & Göpfert Wellpappen-Verarbeitungs- Systeme GmbH offer you the ability to efficiently produce fully automatically shipping containers with inline stitching. A pre-feeder is delivering the sheets to our inline machines which can be equipped with feeder, print units, slotter-scorer, and rotary die cutter. Following the blanks are transferred to the folding and sealing units. The BGM machines offer three sealing methods – glue, stitch and tape. In general the INLINER machines produce boxes of the FEFCO 200 Series - RSC.

BGM Flexo Folder Gluer

Flexo-folder gluers of the premium quality for highest process availability

You are looking for a high-output flexo-folder gluer of premium quality and highest process availability? BGM Bahmüller und Göpfert GmbH offers the product lines CONTAINER LINE and CASE LINE as intelligent solutions for your requirements.